Quick Clean Of Capp In Cup System; Deep Clean Of Capp In Cup System - Gaggia Milano NAVIGLIO MILK Mode D'emploi

ENGLISH
24
MAN. GAG. NAVIGLIO MILK USA EN.indd 24

Quick clean of Capp in Cup system

It is important that you clean the Capp in Cup system daily or after each use as it
preserves hygiene and ensures perfect milk froth consistency.
After each milk frothing, you always need to:
1 Insert the milk suction tube into a container full of fresh water.
2 Place an empty container under the Capp in Cup system.
3 Press the " " button.
4 Whilst the machine is heating up, the "
5 When the " " button goes out, the water is dispensed to clean the circuit.
6 Press the " " button to stop dispensing.
7 Disassemble and wash the Capp in Cup system spout under running water.
8 Clean the milk suction tube with a damp cloth.

Deep clean of Capp in Cup system

The deep clean programme for the Capp in Cup system includes the careful
cleaning of the whole milk circuit, using the Philips "Milk circuit cleaner", and the
manual cleaning of all system components.
1 Make sure that the Capp in Cup system is correctly installed.
2 Pour the milk circuit cleaner into a container.
Add 1/2 litre of lukewarm water and wait for the product to dissolve
completely.
3 Insert the milk suction tube into the container.
4 Place a container of at least 1.5 litres under the Capp in Cup system.
5 Press the " " button.
6 Whilst the machine is heating up, the "
7 When the " " button goes out, the water is dispensed to clean the circuit.
8 When the solution is finished, press the "
" and " " buttons flash.
" and " " buttons flash.
" button to stop dispensing.
05/11/2019 11:37:53