Automatic Rinse Cycle; Manual Rinse Cycle - Gaggia Milano NAVIGLIO MILK Mode D'emploi

ENGLISH
14
MAN. GAG. NAVIGLIO MILK USA EN.indd 14

Automatic rinse cycle

When the correct temperature is reached, the machine automatically performs a
rinse cycle of the internal circuits with fresh water. This takes less than a minute.
1 Place a container under the dispensing spout to collect the small quantity of
water which will be discharged.
2 The " " and " " buttons flash during this entire process.
3 Wait for the cycle to finish automatically.
4 When the above steps are complete, check that the "
" buttons are lit.

Manual rinse cycle

During this process a coffee is brewed and fresh water flows through the steam/
hot water circuit. This takes a few minutes.
1 Place a container under the coffee dispensing spout.
2 Make sure that the "
3 Press the " " button. The machine will start brewing a coffee.
4 Wait until brewing has finished, then empty the container.
Repeat the operations from step 1 to step 3 twice, then continue with step 5.
", " ", " " and " " LED lights are lit.
", " ", " " and "
05/11/2019 11:37:41