Beverage Brewing - Gaggia Milano NAVIGLIO MILK Mode D'emploi

ENGLISH
16
MAN. GAG. NAVIGLIO MILK USA EN.indd 16
2 Remove the "INTENZA+" water filter from its packaging.
Immerse it vertically in cold water (with the opening positioned upwards) and
gently press its sides so as to let the air bubbles out.
3 Set the filter according to the water hardness in your area. The settings can be
found on the filter packaging.
A = Soft water
B = Hard water (standard)
C = Very hard water
4 Insert the filter inside the empty water tank. Press it down until it cannot move
any further.
5 Fill the water tank with fresh water and insert it back into the machine.
Write down the date of the next water filter replacement (+ 2 months).
6 Dispense all the water in the tank by using the hot water function
(see the "Dispensing Hot Water" chapter).
7 Fill the water tank again.

Beverage brewing

Before brewing a beverage, check that both the water tank and the coffee bean
container are filled. Make sure that the dispensing spout is placed at the correct
distance from the cup edge.
05/11/2019 11:37:43