Dispensing Hot Water - Gaggia Milano MAGENTA MILK Mode D'emploi

Masquer les pouces Voir aussi pour Milano MAGENTA MILK:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

QUICK MILK CLEAN
to start press
4219-465-02851 MAN. GAG. MAGENTA Milk 120V EN-FR Rev 01.indd 21
3 Place a cup or a glass under the Coffee dispensing spout and the Capp in Cup
system.
4 Press the HOME
button and choose the desired beverage from the menu.
HOME
-
Press the button corresponding to the desired beverage.
-
Press the START/STOP
age.
5 The machine dispenses a default amount of coffee and frothed milk into the
cup or the glass. Depending on the beverage chosen, either coffee or frothed
milk will be dispensed first.
If you wish to customise the settings of a specific beverage, please refer to the
"Beverage customisation" chapter.
6 After dispensing your coffee-based and frothed milk beverages, it is best to
complete the quick cleaning procedure of the milk circuit within 10 seconds.
However, the procedure can also be carried out later by accessing the cleaning
menu via the CLEAN/SET
the "QUICK CLEAN" option. Then press the "
Then, follow the instructions shown on the display.
Note:We suggest that you carry out a quick clean at least once a day and that you
rinse the Capp in Cup system Spout under running water.
Press the START/STOP
procedure later.

Dispensing hot water

Warning: when preparation starts, the steam tube may spray steam and hot water.
1
Remove the Capp in Cup system and place a container under the steam tube.
2
Press the HOME
button, browse the various screens using the green "
button, and select hot water.
HOME
button to start dispensing the selected bever-
START/STOP
button. Press the "CLEAN" button and select
" button.
clean/setting
button to confirm, or "
START/STOP
English
21
" to carry out the
"
21/01/2021 12:05:23

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Ri8701Sup 051p

Table des Matières