What To Do If The Descaling Process Is Interrupted; Various Settings; Language - Gaggia Milano CADORNA PRESTIGE Mode D'emploi

English
32
4219-450-08061 MANUAL GAG. CAD. PRESTIGE EN-FR 120US.indd 32

What to do if the descaling process is interrupted

You can exit the descaling procedure by pressing the ON/OFF
control panel. If the descaling procedure is interrupted before its completion,
proceed as follows:
1 Empty the water tank and wash it thoroughly.
2 Fill the water tank with fresh water up to the CALC CLEAN notch and switch
the machine on again. The machine will warm up and perform an automatic
rinse cycle.
3 Before preparing any beverage, perform a manual rinsing cycle as described in
the specific chapter.
Note: if the procedure has not been completed, it will be necessary to carry out
another descaling procedure as soon as possible.

Various Settings

By pressing the CLEAN/SETTING
display, it is possible to reset or modify several machine parameters including:

Language

-
Water filter
-
Timer stand-by
-
Water hardness
-
Measurement units
-
Beverage counter
-
Restore factory settings
-
Language
When the language setting icon is selected, the list of available languages will be
displayed.
Languages available
ITALIAN
ENGLISH
GERMAN
FRENCH
SPANISH
PORTUGUESE
button and selecting " SETTINGS " on the
clean/setting
DUTCH
DANISH
GREEK
POLISH
RUSSIAN
ROMANIAN
button on the
ON/OFF
HUNGARIAN
BULGARIAN
CZECH
SLOVAK
LITHUANIAN
08/11/2019 13:01:37