Cleaning The Brew Group - Gaggia Milano CADORNA PRESTIGE Mode D'emploi

4219-450-08061 MANUAL GAG. CAD. PRESTIGE EN-FR 120US.indd 27
Accurate cleaning of the milk carafe under running
water
To carefully clean the milk carafe, you must disassemble it completely and wash it
under running water, following these steps:
1 Press the release buttons to remove the lid (fig. 23).
2 Rotate the milk carafe's dispensing spout to the "
3 Lift the milk dispensing spout from the lid (fig. 25).
4 Remove the milk suction tube (fig. 26).
5 Press the button indicated by an arrow to unblock the cover of the milk
dispensing spout (fig. 27).
6 To remove the cover, press lightly on the sides of the dispenser and pull the
cover upwards to remove it from the dispenser (fig. 28).
7 Remove the ring from the milk carafe dispenser (fig. 29).
8 Pull the milk froth unit upwards (fig. 30).
9 Pull the support away from the milk froth unit (fig. 31).
10 Pull the support outwards and separate it from the remaining part (fig. 32).
11 Clean all parts with warm water.
12 Reassemble all the parts in the reverse order.

Cleaning the brew group

Warning: do not wash the brew group in the dishwasher and do not use dish-
washing detergents, since they may cause the malfunctioning of the brew group
and alter the coffee flavour.
Removing the brew group
1 Turn off the machine and disconnect the power cord.
2 Remove the coffee pucks container and open the service door.
3 Remove the coffee residues drawer.
English
.
" position (fig. 24).
08/11/2019 13:01:30
27