Measuring Water Hardness; Intenza+ Water Filter - Gaggia Milano CADORNA PRESTIGE Mode D'emploi

1 sec.
4219-450-08061 MANUAL GAG. CAD. PRESTIGE EN-FR 120US.indd 15

Measuring water hardness

You'll need to set the water hardness when you install your machine.
Take the water hardness measuring strip that you find in the box and follow the
steps shown on the display during installation. To adjust the water hardness
setting later, press the CLEAN/SETTING
" WATER HARDNESS "
from the settings menu.
1 Immerse the water hardness measuring strip in a glass of water for 1 second.
Remove the strip from the water and wait 1 minute.
2 Note how many squares turn red.
3 Use the green " " and "
to the table below. Confirm the setting by pressing "
Small red
squares

INTENZA+ Water Filter

We recommend using the INTENZA+ water filter to limit the formation of limescale.
This ensures the machine will last longer and the aroma of your coffee will be
better.
Water is an essential element in brewing coffee: it is therefore extremely important
to ensure it is always filtered adequately.
The INTENZA+ water filter prevents the formation of mineral deposits, improving
the quality of the water.
button, select " SETTINGS ", and then
clean/setting
" buttons to select the water hardness according
Value to set Water hardness
1 very soft water
2 soft water
3 hard water
4 very hard water
English
15
".
INTENZA+
A
A
B
C
08/11/2019 13:01:02