Beverage Customisation And Profile Creation - Gaggia Milano CADORNA PRESTIGE Mode D'emploi

English
22
ESPRESSO COFFEE
CAPPUCCINO LATTE MACCHIATO
ON/OFF my favourites HOME clean/setting
ESPRESSO LUNGO AMERICANO
CAFÈ AU LAIT ACQUA CALDA
ON/OFF my favourites HOME clean/setting
COFFEE
30 ml
TEMP
medium
ESPRESSO
ESPRESSO
COFFEE
30 ml
FF my favourites HOME
COFFEE
30 ml
ON/OFF clean/setting
my favourites HOME
TEMP
medium
ON/OFF my favourites
4219-450-08061 MANUAL GAG. CAD. PRESTIGE EN-FR 120US.indd 22
2 Press the HOME
" " and "
Warning: only select " HOT WATER " from the HOME screen when the hot water
dispensing spout is installed.
3 Press the " HOT WATER " button. Finally, press the START/STOP
START/STOP
commence dispensing.
Note: you can interrupt the brewing at any time by pressing the START/STOP
button.
If you wish to customise the volume of water before you begin, please refer to the
START/STOP
"Beverage customisation" chapter.
Beverage Customisation and Profile
Creation
This machine makes it possible to modify the settings of a beverage according to
your preferences and save it to one of four available profiles.
Customisation
1 Press the HOME
2 Select your beverage.
3 All the settings that can be adjusted and/or selected are displayed on the
screen. Based on the type of beverage, you can adjust and/or select:
the amount of coffee and milk;
-
the temperature of the coffee;
-
the dispensing of two cups at the same time;
-
the use of pre-ground coffee;
-
the intensity of the aroma (only when using coffee beans);
-
4 Once the " COFFEE
the green "
Press "
clean/setting START/STOP quantity will be displayed.
5 Press the " TEMP
beverage from among the following options:
START/STOP
low;
-
ESPRESSO
medium;
-
high;
-
HOME clean/setting START/STOP
button and browse the various screens using the green
" and select "HOT WATER".
HOME
button.
HOME
" or " MILK
" and " " buttons to select the desired amount.
" to confirm and return to the previous screen, where the new
" button several times to adjust the temperature of the
button to
START/STOP
" button has been pressed, use
08/11/2019 13:01:21
START/STOP