Wilo CronoLine-IL-E Notice De Montage Et De Mise En Service page 93

3 Transport and storage
3.1 Shipping
3.2 Transport inspection
3.3 Storage
Installation and operating instructions • Wilo-CronoLine-IL-E, Wilo-CronoTwin-DL-E, Wilo-CronoBloc-BL-E • Ed.01/2024-02
• Ensure compliance with local directives or general directives
[e.g. IEC, VDE, etc.] and instructions from local energy supply
companies.
Follow all information that appears on the product and ensure
that it remains permanently legible:
• Warning and hazard notices
• Rating plate
• Direction of rotation arrow/symbol for direction of flow
• Labelling of connections
Children and persons younger than 16 years or with reduced
physical, sensory or mental capacities or limited experience are
prohibited from handling the product! A technician must super-
vise persons younger than 18 years!
The pump is secured to a pallet ex works, packaged in a box and protected against dirt and
moisture.
Check delivery immediately for damage and completeness. Defects must be noted on the
freight documentation! Defects must be notified to the transport company or the manu-
facturer immediately on the day of receipt of shipment. Subsequently notified defects can
no longer be claimed for.
Only remove the outer packaging at the place of utilisation to ensure that the pump is not
damaged during transport.
CAUTION
Damage due to incorrect handling during transport and stor-
age!
Protect the product from moisture, frost and mechanical damage during
transport and temporary storage.
If available, leave the covers on the pipe connections so that no dirt and other foreign mat-
ter can get into the pump housing.
To avoid scoring at the bearings and sticking, turn the pump shaft once a week using a
socket wrench.
If a longer storage time is required, contact Wilo for preservation measures.
WARNING
Risk of injury due to incorrect transport!
If the pump is transported again at a later date, it must be packaged so
that it cannot be damaged during transport. Use the original packaging
for this or choose equivalent packaging.
en
93