Wilo CronoLine-IL-E Notice De Montage Et De Mise En Service page 89

2.3 Electrical work
2.4 Transport
Installation and operating instructions • Wilo-CronoLine-IL-E, Wilo-CronoTwin-DL-E, Wilo-CronoBloc-BL-E • Ed.01/2024-02
• Electrical work: a qualified electrician must carry out the elec-
trical work.
• Installation/dismantling: The technician must be trained in the
use of the necessary tools and fixation materials.
• The product must be operated by persons who have been in-
structed on how the complete system functions.
• Maintenance work: The technician must be familiar with the
use of operating fluids and their disposal.
Definition of "qualified electrician"
A qualified electrician is a person with appropriate technical edu-
cation, knowledge and experience who can identify and prevent
electrical hazards.
The operator must confirm and ensure the field of authority, the
competence and the monitoring of the personnel. If the person-
nel do not possess the necessary knowledge, they must be
trained and instructed. If required, this can be carried out by the
product manufacturer at the operator's request.
• Have electrical work carried out by a qualified electrician.
• When connecting to the mains supply, comply with the nation-
ally applicable guidelines, standards and regulations as well as
specifications issued by the local energy supply companies.
• Before commencing work, disconnect the product from the
mains and secure it against being switched on again.
• Give staff training on how to establish the electrical connection
and the methods for switching off the product.
• Observe the technical information in these installation and op-
erating instructions as well as on the rating plate.
• Earth the product.
• Comply with the manufacturer's specifications when connect-
ing the product to electrical switching systems.
• Have a defective connection cable replaced immediately by a
qualified electrician.
• Wear protective equipment:
Safety gloves for protection against cuts
–
Safety shoes
–
Sealed safety glasses
–
Safety helmet (when using lifting equipment)
–
• Only use legally specified and approved lifting slings.
• Select the lifting sling based on the prevailing conditions
(weather, slinging point, load etc.).
• Always attach the lifting sling to the designated slinging points
(lifting eyes).
• Position the lifting accessory in a way that ensures stability
during use.
en
89