AL-KO BKS 3835 Mode D'emploi page 30

en
Symbols on the machine
The port to refuel the chain oil
Position: near the oil cap
Operate the engine switch Flipping the switch to the "O" position, immediately the engine
stops.
Position: rear at the left side of the rear handle
Operate the choke knob Pull out the choke knob, close the choke; push in the choke knob,
open the choke.
Position: Air filter cover
Adjust the oil pump If you turn the rod by screwdriver follow the arrow to the "MAX" posi-
tion, the chain oil flow more, and if you turn to the "MIN" position, less.
Position: Bottom of the power unit
The screw under the "H" stamp is The High-speed mixture adjustment screw.
Position: upper-left of the rear handle
The screw under the "L" stamp is The Slow-speed mixture adjustment screw
Position: upper-left of the rear handle
The screw up the "T" stamp is the idle speed adjustment screw.
Position: upper-left of the rear handle
Shows the directions that the chain brake is released (white arrow) and activated (black ar-
row).
Position: Front of the guide rail
Shows the direction of the saw chain installation.
Position: Front of the guide rail
Guaranteed sound power level:
- 112dB for BKS 3835
- 113dB for BKS 4040
Engine manual start
30 BKS 3835 / BKS 4040