Publicité
Les langues disponibles
Les langues disponibles
•
Remove packaging materials such as cardboard, plastics or
styrofoam and discard appropriately.
•
Wipe clean all the parts with a soft damp cloth or sponge and
dry thoroughly.
•
DO NOT immerse in water or place in dishwasher.
•
The gasket sets in behind the wire guide. Before your first use,
gently pull the gasket out. (IMAGE 1)
•
Hand wash in warm soapy water. Dry, then firmly press the
gasket back in behind the wire guide. Make sure the gasket is
properly installed into the groove inside the lid. (IMAGE 2)
HOW TO OPEN THE LID
When the lid of the canner is at the "Closed-Lid Position", hold the
lid handle and turn it about 1/8 of a turn clockwise (IMAGE 1), until
you reach the "Open-Lid Position". Lift up on the lid handle.
NOTE: For brand new units, the seal of the lid may be slightly
stronger than normal and may be somewhat difficult to unlock.
Once the lid has been opened and closed several times, it will
loosen up.
HOW TO CLOSE THE LID
When the lid of the canner is in vertical position hold the lid handle and close it
downwards at the "Open-Lid Position". After that, turn it in a counter clockwise
direction until you reach the "Closed-Lid Position".
IMPORTANT:
The lid must be closed and turned to the
"Closed-Lid Position" for the control panel settings to
function. If the lid is not turned to the closed position, the
display will illuminate the word "LID" and beep three times
(IMAGE 2)
continuously.
HOW TO DISMANTLE THE LID
When the lid of the cannner is in the upright vertical position, hold the lid with both
hands, and adjust the height between the lid and the upper edge of the cooker to
around 4 inches (IMAGE 3). Then turn it in a counter clockwise direction until you
reach the "Closed-Lid Position" (IMAGE 4). Then lift the lid up and away from the
Smart Canner body. (IMAGE 5).
3.
Before First Use
Lid Instructions
4.
4
1.
2.
1.
2.
5.
Publicité
