Publicité
Les langues disponibles
Les langues disponibles
Pressure Regulator (Jiggler) Removal and Installation
The Smart Canner comes with the Black Pressure Regulator (Jiggler) installed
in cover on top of vent stem. Should you need to change to the Green Pressure
Regulator (Jiggler) (for altitudes higher than 1,000 ft.) Simply lift the Pressure
Regulator (Jiggler) straight up and pull off. To put the Pressure Regulator (Jiggler)
back on the unit, simply put back on vent stem and push down.
IMPORTANT: Black Pressure Regulator (Jiggler) is for use at/below 1,000 ft.
elevation. Green Pressure Regulator (Jiggler) is for use at/above 1,001 ft. elevation.
* We do not recommend using the canner over 6,000 ft. due to the effects of
excessive air pressure on the unit.
WARNING -
During the canning process, hot steam will
continuously be released out of the Pressure Regulator (Jiggler). Be
sure nothing is directly above this area when using the Smart Canner.
CAUTION -
To avoid burn injury, keep face and hands away from escaping steam
when opening the lid.
For general rules on safe canning guidelines please reference
the National Center for Home Food Preservation:
https://nchfp.uga.edu/
For the USDA's Complete Guide to Home Canning and tested
recipes please reference:
https://nchfp.uga.edu/publications/publications_usda.html
and follow their instructions precisely.
Overview of Components
Before First Use
3
Publicité
