Zodiac iAquaLink CONTROL Z550iQ Notice D'installation Et D'utilisation page 52

2.5 I Connecting to the iAquaLink+™ app
Mobile device
The Z550iQ heat pump can be remotely controlled from a smartphone or tablet, via the
iOS and Android systems.
Before connecting to the iAquaLink+™ app, ensure that you:
• Use a Wi-Fi-enabled smartphone or tablet.
• Use a Wi-Fi network with a reasonably strong signal when connecting to the heat pump: the
Wi-Fi signal must be detectable at the place where the appliance is used. If this is not the case,
a technical solution must be provided to amplify the existing signal.
• Rest close to the appliance and have your home Wi-Fi network password at the ready.
❶. Download the iAquaLink+™ app from the App Store (iOS) or Google Play Store (Android) then create an iAquaLink+™
account (if the app is already installed, move onto the next step).
❷. Open the application and follow the steps described in the app to add the heat pump.
18
Home Wi-Fi network Heat pump
iAquaLink+™
app available for