ATH-Heinl ATH-W Serie Manuel D'instructions page 99

...and connect the cable to the middle connection
port on the machine.
2.8.7. Activating the tyre width gauge
Now activate the width gauge in the settings
menu.
In order to do so, press F4 on the
main screen.
In the settings, go to 7 "Width gauge" using the
arrow buttons and set this to "Yes" using the
direction buttons .
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
- 34 -