ATH-Heinl ATH-W Serie Manuel D'instructions page 102

Calibration of the balancing machines
1. Now affix the calibration weight to any point on the INSIDE of the
rim ( ... = 100 g)
2. Next turn the wheel until the weight is at the 12 o'clock position.
3. Press the [OK] button.
4. Press the [START] button.
Calibration of the balancing machines
1. Now affix the calibration weight to any point
on the OUTSIDE of the rim ( ... = 100 g)
2. Press the [START] button.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
- 37 -