ATH-Heinl ATH-W Serie Manuel D'instructions page 96

Now, slide the front half over the protector.
Next, connect both parts and secure these using
both screws.
Attach the fixing screw to the entry point again.
Mount the handle back onto the protector.
2.8.5. Assembling the monitor
Fix the monitor holder to the housing using the
four screws provided.
Remove the two upper screws on the cover of the
holder in order to guide the connecting cables
through the inside cable channel.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
- 31 -