ATH-Heinl ATH-W Serie Manuel D'instructions page 92

2.8.2. Fixing with safety anchor
Drill holes, observing the necessary drill depth A
Clean out the inside of the holes.
and drill diameter of the dowel manufacturer.
Tighten the nuts to the torque specified by the
manufacturer.
Insert the anchor bolts into the holes up to the
Clamping thickness B varies depending on the
appropriate depth.
floor covering.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
- 27 -