Publicité
Les langues disponibles
Les langues disponibles
To access the calibration programme, press F5 on the main screen.
Calibration of the weight sensors
Press F1 in the calibration programme and follow the instructions on the screen:
1. Secure one wheel on the machine's balancing shaft.
2. Now enter the wheel data into the programme.
3. Press the [START] button
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
System calibration
F1. Calibration of the balancing machines
F2. Calibration of the gauge
F3. Calibration of the width gauge
Calibration of the balancing machines
WARNING: Please note that the balancing machine will be
calibrated incorrectly if the wrong data is entered.
- 36 -
Publicité
