ATH-Heinl ATH-W Serie Manuel D'instructions page 94

As soon as the markings are lined up, the
balancing shaft can be secured with the screws
which are supplied.
2.8.4. Assembling the wheel protector
Remove the upper cover from the protector
mechanism.
Secure the cover using the four screws, washers
and spring washers provided.
Connect these to the corresponding connection
port and affix the cover again.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
- 29 -