Publicité
Les langues disponibles
Les langues disponibles
e) Optimisation
It is possible to minimise the static imbalance of the wheel using the OPT function. The imbalance of the
wheel rim is evened out with the imbalance of the tyre.
After a balancing run, you can test the static
imbalance by pressing the F2 button.
If the imbalance is over 30 g, an optimisation
process is recommended.
In order to do so, you can leave the results page
by pressing the F5 button.
Then, you can access the optimisation programme
on the main screen by pressing the F2 button.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
Imbalance Optimisation
Press the [START] button for the first pass
- 15 -
Publicité
