Invacare Jasmine Patient Lift Manuel D'utilisation Et D'entretien page 25

All manuals and user guides at all-guides.com
SECTION 7—MAINTENANCE
Replacing the Swivel Bar or Optional Cradle Attachment
WARNING
After the first year of use, the hooks of the swivel bar and mounting brackets of the boom should
be inspected every six months to determine the extent of wear. If these parts become worn,
replacement MUST be made.
NOTE: For this procedure, refer to FIGURE 7.4.
1. Remove the side covers.
NOTE: Support the swivel bar or cradle attachment from underneath while removing the attaching hardware.
2. Remove the socket head screw, washer, bushings, nylon spacers, washer and nut that attach the swivel bar or cradle
attachment to the boom.
NOTE: When the attaching hardware is removed, the pin, washer and o‐ring will become loose.
3. To install the swivel bar, reverse STEPS 1‐2.
CAUTION
DO NOT overtighten the nut and socket head screw. This damages the mounting bracket.
Top Rubber Cap
Side Rubber Cap
Washer
Nut
Bushing
Bushing
Optional Cradle
Attachment
Washer
Nylon Spacer
Socket Head Screw
Side Rubber Cap
Nylon Spacer
Swivel Bar
O-ring
Washer
Pin
Bottom Rubber Cap
FIGURE 7.4 Replacing the Swivel Bar or Optional Cradle Attachment
25
Part No 1150704 Jasmine™ Patient Lift