Dräger X-node Notice D'utilisation page 12

en |
Safety-related information
1 Safety-related information
1.1 Basic safety information
– Before using this product, carefully read these instructions for use
and those of the associated products.
– Strictly follow the instructions for use. The user must fully
understand and strictly observe the instructions. Use the product
only for the purposes specified in the intended use section of this
document.
– Do not dispose of the instructions for use. Ensure that they are
retained and appropriately used by the product user.
– Comply with all local and national rules and regulations
associated with this product.
– Maintenance work may only be carried out by Dräger or by
qualified personnel trained by Dräger MSI. Otherwise, Dräger MSI
will reject any responsibility for the product working properly after
repair and for the validity of approvals.
– Use only genuine Dräger spare parts and accessories for
maintenance. Otherwise, the functional integrity of the product
may be impaired.
– Do not use faulty or incomplete products. Do not modify the
product.
– Notify Dräger in the event of any component fault or failure.
– Only store the product at room temperature and without exposure
to solvents, plasticisers, exhaust gases or combustibles.
– Do not use the product in a potentially explosive atmosphere.
– Do not open rechargeable batteries or throw them into a fire.
12
2 Conventions in this document
2.1 Meaning of the warning notices
The following warning notices are used in this document to alert the
user to potential hazards. The meanings of the warning notices are
defined as follows:
Warning Signal word
sign
CAUTION
2.2 Trademarks
Trademark Owner of trademark
Dräger
®
DrägerSensor
Bluetooth SIG, Inc.
®
Bluetooth
Instructions for use
Consequences of non-compli-
ance
Indicates a potentially hazardous
situation. If not avoided, it could
result in physical injury. It may also
be used to alert against unsafe
practices.
|
Dräger X-node