Keysight EL30000 Serie Guide D'utilisation page 27

Prepare Instrument for Use
Initial inspection
When you receive your instrument, inspect it for any obvious damage that may have occurred during shipment. If
there is damage, notify the shipping carrier and nearest Keysight Sales and Support Office immediately. Refer to
www.keysight.com/find/assist.
Until you have checked out the instrument, save the shipping carton and packing materials in case the unit has to
be returned. Check the list under
instrument. If anything is missing, please contact your nearest Keysight Sales and Support Office.
Standard shipped items
– Keysight EL33133A/EL34143A/EL34243A DC electronic load
– AC power cord
– Certificate of calibration
Shipped with the EL34143A models:
– One 10 A, 3.5 mm female 4-pin terminal I/O block connector
– One 8 A, 3.5 mm 2-pin terminal sense block connector
– One 85 A, 12 mm 2-pin mating connector
Shipped with the EL34243A model:
– One 10 A, 3.5 mm female 4-pin terminal I/O block connector
– Two 8 A, 3.5 mm 2-pin terminal sense block connector
– Two 85 A, 12 mm 2-pin mating connector
Documentation and firmware revisions
The Keysight EL30000 Series documentation listed below can be downloaded for free through our website at
www.keysight.com/find/el30000.
– Keysight EL30000 Series DC Electronic Load User's Guide. This manual.
– Keysight EL30000 Series DC Electronic Load Programming Guide
– Keysight EL30000 Series DC Electronic Load Service Guide
For the latest firmware revision and firmware update instruction, go to www.keysight.com/find/el30000.
Recommended calibration interval
Keysight Technologies recommends a one-year calibration cycle for the EL30000 Series DC electronic load.
Keysight EL30000 Series User's Guide
Standard Shipped Items and verify that you have received these items with your
27