Keysight EL30000 Serie Guide D'utilisation page 130

Menu Available settings
From: Int, Ext
Browse -
Recall -
Power On Setting
Power On selects the state that will be loaded at power-up. This can be either the factory default state (Default), or
user-defined states (State 0 to State 9).
Press Set Power On to save the setting.
Set to Defaults
Set to Defaults loads the instrument's factory default state.
130
Selects whether you want to recall an instrument's state from the internal or external memory.
– Internal: The instrument's state is recalled from the instrument's internal memory.
– External: The instrument's state is recalled from the external USB drive.
Allows you to browse and specify the state file in the external memory to recall from.
Recall the state.
Description
Keysight EL30000 Series User's Guide