Canon K10297 Guide D'utilisation page 66

(2) Repeat the procedure to input inputting the pattern number for columns B and C.
Note
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable
vertical white streaks.
(A)
(A) Less noticeable white streaks
(B) More noticeable white streaks
(3) When you have finished inputting all pattern numbers, the fax returns to standby mode.
Note
When you turn off the machine, be sure to press the ON/OFF button on the machine.
Otherwise, the settings made here will not be saved.
Cleaning Your Machine
Your fax requires little periodic maintenance. This section describes the necessary cleaning
procedures for the fax. Please note the following before cleaning:
Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the
components or generate static charges.
Caution
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean the
interior of the fax.
Cleaning the Exterior of the Machine
When cleaning the exterior of the machine, do not use tissue paper, rough-textured cloth, or
similar materials, as these may scratch the surface. Also, never use volatile liquids such as
thinners, benzene, acetone, or any other chemical cleaner to clean. Be sure to use a soft cloth
such as eyeglasses cleaning cloth and wipe off dirt on the surface with it gently. Smooth out
wrinkles on the cloth if necessary before cleaning.
Cleaning Inside of the Machine
To prevent ink spots and paper dust from accumulating inside the fax and affecting print quality,
clean the print area of the fax periodically.
1
Open the Printer Cover.
Caution
Do not touch the components or any metal parts.
62 Routine Maintenance
(B)