Canon K10297 Guide D'utilisation page 37

6
Press [Stop].
Setting ends and the fax returns to standby mode.
Receiving to Memory Temporarily
You can enable memory receiving feature temporarily.
Received faxes will not be printed automatically.
1
Press [ON/OFF] to select <AUTO PRINT OFF>.
The fax starts receiving documents in memory.
To cancel, press [ON/OFF] again.
When <AUTO PRINT OFF> is cancelled, received faxes will be printed automatically.
Changing Calling Volume
1
Press [Menu].
2
Use [ ] or [ ] to select <DATA REGSTRATION>, then press [Start].
3
Use [ ] or [ ] to select <USER SETTINGS>, then press [Start].
4
Use [ ] or [ ] to select <VOLUME CONTROL>, then press [Start].
5
Use [ ] or [ ] to select <CALLING VOLUME>, then press [Start].
6
Use [ ] or [ ] to change the volume, then press [Start].
7
Press [Stop].
Setting ends and the fax returns to standby mode.
Receiving Documents in Memory While Performing Another Task or
When a Problem Occurs
If your fax is performing another task or encounters a problem when receiving a document, it
automatically stores the unprinted pages in memory, and the LCD displays <REC'D IN
MEMORY> as well as one or more messages. For an explanation of the message(s) and details
on the action to take, see page 77.
Note
Once the pages are printed, they are deleted from memory.
Polling to Receive Documents
The polling feature allows you to request a document to be faxed to you from another fax
machine. The sending party only needs to make sure the document is on a fax machine and
ready to be sent. Thus, when your fax polls the other fax machine, the document is sent
automatically. The fax can poll any fax machine that supports polling.
Note
Before attempting to poll a fax machine, make sure that the other fax machine supports polling.
Your fax cannot do polling transmissions.
1
Press [Menu].
2
Use [ ] or [ ] to select <FAX OPTIONS>, then press [Start].
Receiving Faxes 33