Deleting Messages - Canon K10297 Guide D'utilisation

Deleting Messages

1
Press [Menu].
2
Use [ ] or [ ] to select <MSG REGISTRATION>, then press [Start].
3
Use [ ] or [ ] to select the type of message you want to delete, then press [Start].
The LCD displays <PLAY>.
4
Use [ ] or [ ] to select <DELETE>, then press [Start].
5
Press [Stop].
The fax returns to standby mode.
Note
You cannot delete the <OUTGOING MESSAGE>. The old outgoing message will be automatically
deleted when you record your new message.
Playing Telephone Messages
Telephone messages will be played back in order from the oldest message recorded. If a voice
memo has been recorded, it will be played back first.
1
Press [Play].
The day and time when the telephone message was recorded, the number of telephone
messages and the number of the message being played (ICM No.) are displayed whenever a
message is played.
SUN 17:15
Note
Press [ ] to listen to the message again. (Repeat)
Press [ ] to play the next message. (Skip)
Press [ ] twice to play the previous message.
Press [Stop] to stop playback.
Press [Delete] during playback to delete a message.
Use [ ] or [ ] to change the volume.
Follow the procedures below to delete all messages.
1
Press [Delete]. The LCD displays <YES=( ) NO=(#)>.
2
Press [ ] to delete all messages.
A voice memo is not deleted (see page 42).
If you decide not to delete all messages, press [#].
42 Using TAM Mode (FAX-JX500/JX300 only)
02/05