Canon K10297 Guide D'utilisation page 19

Document Requirements
Types of Document You Can Scan
Scanned Area
The actual area scanned by the fax is
shown below.
A4
208 mm
1.0 ±3.5 mm
Note
If you use documents smaller than A4 size, align the document with the left Document Guide.
Problem Documents
To prevent document jams in the Document Tray, do not attempt to load the following types of
documents into the fax:
- Wrinkled or creased paper
- Torn paper
- Coated paper or glossy paper
- Thick paper
Remove all staples, paper clips, etc. before loading the document into the Document Tray.
Make sure any glue, ink, or correction fluid on the paper is completely dry before loading the
document into the Document Tray.
Make a photocopy of any document that will not feed into the fax so that you can then load the
copy into the Document Tray.
3.0 ±3.0 mm
292 mm
2.0 ±2.0 mm
1.0 ±3.5 mm
Size
You can load documents larger than 105
mm wide and 105 mm long.
The maximum size of document that can be
loaded is 216 mm wide by 400 mm long.
Min.
105 mm
Min.
105 mm
Max. 216 mm
- Curled or rolled paper
- Carbon paper or carbon-backed paper
- Onion skin or thin paper
- Envelopes
Before Using Your Machine
Max.
400 mm
15