GE 29582 Mode D'emploi page 28

Dialing a Stored Number
1. Pick up the handset or press the SPEAKERPHONE button.
2. Press the DIAL button. The screen displays MEMORY DIAL=?.
3. Press the memory location number (0-9). The number dials automatically.
Alternatively, you can preview the number before dialing (when the handset is on-hook).
Press the DIAL button and then select the desired memory location (0-9). The number
will be shown on the display. Press the DIAL button again to make the connection in
speakerphone mode.
Dialing a Quick Dial Number
1. Pick up the handset or press the SPEAKERPHONE button.
2. Press A, B, or C. The number dials automatically.
IMPORTANT: If you make test calls to emergency numbers, remain on
the line and explain the reason for the call. Also, make these calls in
off-peak hours, such as early morning or late evening.
Alternatively, you can preview the number before dialing (when the handset is on-hook).
Press a Quick Dial button (A, B or C), the number will be shown on the display. Press the
DIAL buttont again to make the connection in speakerphone mode.
Reviewing Stored Numbers
1. Press the DIAL button. The screen displays MEMORY DIAL=?.
2. Use the SKIP or REPEAT button to scroll through the memory locations.
• To dial the displayed number, press the DIAL button. The speakerphone comes on and
dials the number automatically. (To cancel, press the SPEAKERPHONE button).
• To exit stored number review, press the FLASH/EXIT button.
• To change the displayed number, press the STORE button. The screen displays EDIT
TEL. NO.. See "Storing a Number in Memory."
NOTE: Direct access memory A, B and C are displayed as Memory 11,
12 and 1 respectively on the display.
28
All manuals and user guides at all-guides.com