Publicité
Les langues disponibles
Les langues disponibles
Telephone Set Up
You can customize the following settings to suit your needs.
Local Area Code
Display Contrast
Time/Date
Message Length
Recording
Quality
Rings to Answer
Remote Access
TONE/PULSE
Dialing
Setting Your Local Area Code
1. Press and release the MENU button. The screen displays LOCAL AREA CODE. The unit
announces, "Setup menu, use SKIP or REPEAT. To save a setting,
press MENU."
2. The left-most digit, or a (_) sign flashes indicating the unit is ready to accept the area
code entry.
3. Use the keypad to enter your three digit Local Area Code.
4. After the 3rd and last digit are entered, press the MENU button to store the area code
and go to the next setting.
NOTE: If you make a mistake, you can use the SKIP or REPEAT
button to move between 1st to rd digit and input the number from
the keypad again.
NOTE: To skip to the next setting, press the MENU button. To exit setup,
press the FLASH/EXIT button.
12
All manuals and user guides at all-guides.com
Sets your local area code for Dial Back.
Selects the display contrast.
Sets the time and date.
Sets the length of time allowed for
incoming messages.
Sets the recording quality between
standard (STD) and long play (LONG).
Selects the number of rings before the unit answers.
Sets your 3-digit code used for remote access to the unit.
Sets the phone for tone or pulse dialing.
Default Settings
Local Area Code
– – –
Display Contrast
Time/Date
12 a.m. 1/01
Message Length
2 minutes
Recording Quality
Standard (STD)
Rings to Answer
Security Code
12
Dialing
Tone
Publicité
