GE 29582 Mode D'emploi page 14

AM/PM
1. Press "* " on the keypad for AM and press "# " for PM to set the time of day.
2. When finished, the cursor moves to the Month field. Now you're ready to enter the
month.
Month
1. Use the keypad to enter two digit numbers to set the month.
2. When finished, the cursor moves to the Date field. Now you're ready to enter the day.
Date
1. Use the keypad to enter two digit numbers to set the date.
2. When finished, press the MENU button to confirm.
TIP: For example, to enter 8:09 a.m. /:
1. Press 08.
2. Press 09.
3. Press * (for a.m.).
4. Press 07.
5. Press 04.
6. Press the MENU button.
NOTE: To skip to next setting, press the SKIP button. To exit setup,
press the FLASH/EXIT button.
Setting the Incoming Message Length
This setting allows you to set the maximum length of time allowed for a single incoming
message. You can choose from 1-4 minutes.
1. If you just adjusted the Local Area Code menu, skip to Step 2. If you haven't adjusted
any other setting, press and release the MENU button until the screen displays
MESSAGE LENGTH.
2. Use the SKIP or REPEAT button for the desired setting.
3. When finished, press the MENU button to confirm. The unit beeps.
NOTE: To skip to the next setting, press the MENU button. To exit setup,
press the FLASH/EXIT button.
1
All manuals and user guides at all-guides.com