Ryobi RLT254CDSO Manuel D'utilisation page 17

Important: Some of the following symbols may be used on your product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
Safety alert
Read and understand all instructions before operating the product, follow all warnings and safety
instructions.
Wear eye, hearing and head protection when operating the product.
Beware of thrown or flying objects. Keep all bystanders, especially children and pets, at least 15
m away from the operating area
The product is not intended for use with a toothed saw type blade.
Do not use metal blade (s) on the product
Rotational direction and maximum speed of the shaft for the cutting attachment.
Use unleaded gasoline intended for motor vehicle use with an octane rating of 91 ([R+M]/2) or
higher.
Use full synthetic 2-stroke lubricant for air cooled engines.
Mix the fuel mix thoroughly and also each time before refuelling.
Keep hands away from blades.
Run position
Set the choke lever to "FULL" choke position.
Set the choke lever to "HALF" choke position.
Press the primer bulb 10 times.
English (Original instructions)
SYMBOLS
15
Explanation