Accessories - Panasonic EY7880 Instructions D'utilisation

Storage
Do not store the dust collection cup
in a compressed position. If kept in
a compressed position, it may be
impossible to return to the original
shape.
. MAINTENANCE
• Use only a dry, soft cloth for wiping
the unit. Do not use a damp cloth,
thinner, benzine, or other volatile
solvents for cleaning.
• In the event that the inside of the
tool or battery pack is exposed to
water, drain and allow to dry as
soon as possible. Carefully remove
any dust or iron filings that collect
inside the tool. If you experience
any problems operating the tool,
consult with a repair shop.

. ACCESSORIES

CAUTION:
To prevent the risk of injury, only use
accessory or attachment for its stat-
ed purpose.
Dust Collection Cup
•EY9X004E
Drill chuck
•EY9HX400E
Use with wood drill bit or metal drill
bit with shank of 1.5 mm to 13 mm
diameter.
Do not use the drill chuck in "Rota-
tion with hammering mode (
Use in "Rotation with hammering
mode" may cause break of bit and
result in injury.
Hammer chuck
•EY9HX401E
Use with concrete drill bit, wood drill
bit or metal drill bit with straight shank
of 2.5 mm to 13 mm diameter.
Do not use the hammer chuck with
wood drill bit or metal drill bit in "Ro-
tation with hammering mode" (
Use in "Rotation with hammering
mode" may cause break of bit and re-
sult in injury.
Chisel Attachment
•EY9HX402E
If you need any assistance for more
details regarding these accesso-
ries, ask your local service center.
)".
- 19 -
).