Lamp Indications; Battery Recycling; Accessories - Panasonic EY74A3 Instructions D'utilisation

LAMP INDICATIONS

(Green)
Turn off

Battery Recycling

ATTENTION:
For environmental protection and recycling of materials, be sure that it is disposed of at
an officially assigned location, if there is one in your country.
V. MAINTENANCE
• Use only a dry, soft cloth for wiping the unit.
Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.
• In the event that the inside of the tool or battery pack is exposed to water, drain and allow
to dry as soon as possible. Carefully remove any dust or iron filings that collect inside the
tool. If you experience any problems operating the tool, consult with a repair shop.
VI. ACCESSORIES
• Use only bits suitable for size of drill's chuck.
• Support handle
WEY6470K3217
Charging is completed. (Full charge.)
Battery is approximately 80% charged.
Now charging.
Charger is plugged into the AC outlet. Ready to charge.
Charging Status Lamp.
(Orange)
Left: green Right: orange will be displayed.
Battery pack is cool.
The battery pack is being charged slowly to reduce the load on
the battery.
Battery pack is warm.
Charging will begin when temperature of battery pack drops. If
the temperature of the battery pack is -10° or less, the charging
status lamp (orange) will also start flashing. Charging will begin
when the temperature of the battery pack goes up.
Charging is not possible. Clogged with dust or malfunction of
the battery pack.
Illuminated
These symbols indicate separate collection of waste electrical
and electronic equipment or waste batteries.
More detailed information is contained in the full version Operat-
ing Instructions.
https://www.panasonic-powertools.eu/en/construction/documents.htm
Flashing
- 17 -
EN