Publicité
Les langues disponibles
Les langues disponibles
Choosing a Projector Set
Your HVLP spray gun should be fitted with the proper projector set
for the type of work you will be performing. A projector set consists
of a needle assembly, a fluid nozzle, and an air cap.
Needle Assembly
Fluid Nozzle
You should choose a projector set based on two things: the type of
material to be sprayed and the finish desired.
The chart on the following page should help you to make the right
choice.
Changing a Projector Set
1.
Remove the air cap ring, air cap, and spring plate.
2. Remove the fluid nozzle.
3. Remove the material flow adjustment knob and spring.
© Titan Tool Inc. All rights reserved.
Air Cap
Air Cap Ring
Air Cap
Spring Plate
Material Flow Adjustment Knob
Spring
4. Remove the needle.
IMPORTANT: If the needle does not slide out easily, loosen
the packing nut to prevent the needle or packing from being
damaged.
5. Install the new projector set in reverse order.
9
English
Publicité
