Publicité
Les langues disponibles
Les langues disponibles
English
Definitions
1
Handle Hose
For holding and controlling the unit
with the hand during operation.
2
Loop Handle
For easy control of machine during
cutting work.
3
Carrying Ring
Connects the unit to the harness.
4
Stop Switch
Switches the engine's ignition off
and stops the engine.
5
Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
6
Throttle Set Wheel
Limits the maximum position of the
trottle trigger.
7
Throttle Trigger
Controls the speed of the engine.
8
Cap with Spark Plug Boot
Connects the spark plug with the
ignition lead.
9
Air Filter Cover
Covers and protects the air filter
element.
10 Machine Support
For resting machine on the ground.
11 Manual Fuel Pump
Provides additional fuel feed for a
cold start.
12 Choke Knob
Eases engine starting by enriching
mixture.
28
13 Carburetor Adjusting Screws
For tuning the carburetor.
14 Fuel Filler Cap
For closing the fuel tank.
15 Fuel Tank
For fuel and oil mixture.
16 Starter Grip
The grip of the pull starter, for
starting the engine.
17 Muffler with Spark Arresting Screen
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator. Spark arresting screen is
designed to reduce the risk of fire.
18 Cutting Blades
Steel blades for cutting hedges and
shrubs.
19 Blade Drive Gear
Converts rotary movement of angle
drive into reciprocating movement
of cutting blades.
20 Drive Tube
Encloses and protects the drive
shaft between the engine and
gearbox.
21 Angle Drive
Transmits rotary movement of drive
shaft to the blade drive gear.
22 Sliding Sleeve
Locks and unlocks the cutter bar
adjusting mechanism.
23 Quadrant
Locks the cutter bar in the required
position.
24 Adjusting Lever
Used to set cutter bar to the
required angle.
25 Blade Scabbard
Covers cutting blades when hedge
trimmer is not in use.
26 Spacer at the Shroud
Designed to reduce the risk of burns
and fire.
HL 94
Publicité
