Télécharger Imprimer la page

Stihl HL 94 Notice D'emploi page 23

Masquer les pouces Voir aussi pour HL 94:

Publicité

Les langues disponibles

Les langues disponibles

Use resistor type spark plugs with a
N
properly tightened adapter nut.
Installing the Spark Plug
Fit the spark plug and tighten it
N
down firmly.
Press the boot firmly onto the spark
N
plug.
1
2
Fit the cap (1), insert the screw (2)
N
and tighten it down firmly.
HL 94
Lubricating the Gearbox
Blade Drive Gear
Lubricate the blade drive gear with
STIHL gear lubricant for hedge trimmers
– see "Special Accessories".
HL 0° version
1
Adjustable HL 145° version
1
Check the lubricant level at regular
N
intervals of about every 25 hours of
operation. Unscrew the filler
plug (1) – if no grease can be seen
on the inside of the filler plug, screw
the tube of grease into the filler hole.
Squeeze up to 10 g (2/5 oz) grease
N
into the gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
Unscrew the tube of grease from the
N
filler hole.
Refit the filler plug and tighten it
N
down firmly.
Angle Drive Gear
Lubricate the angle drive gear with
STIHL gear lubricant for hedge trimmers
(special accessory).
Adjustable HL 145° version
2
Check the lubricant level at regular
N
intervals of about every 25 hours of
operation. Unscrew the filler
plug (2) – if no grease can be seen
on the inside of the filler plug, screw
the tube of grease into the filler hole.
Squeeze up to 5 g (1/5 oz) grease
N
into the gearbox.
English
21

Publicité

loading