Stihl HL 94 Notice D'emploi page 12

English
Horizontal Cut (with straight cutter bar)
Hold the cutter bar at an angle of 0° to
10° as you swing the hedge trimmer
horizontally.
10
Swing the cutter bar in an arc towards
the outside of the hedge so that the
cuttings are swept to the ground.
Recommendation: Only cut hedges that
are no more than chest height.
Approved Power Tool
Attachments
The following STIHL attachments may
be mounted to the basic power tool:
Attachment Application
1)
HL 0°, 500 mm Long reach hedge
trimmer
1)
HL 0°, 600 mm Long reach hedge
trimmer
HL 145°, Long reach hedge
1)
500 mm trimmer
HL 145°, Long reach hedge
1)
600 mm trimmer
2)
HT Pole pruners
2) 3)
BF Cultivator with pick
tines
2) 3)
KB (4601) Bristle brush
2) 3)
KW (4601) PowerSweep
1)
Loop handle required on versions
with long drive tube (HL 94)
2)
Not approved for versions with
short drive tube
3)
Loop handle required
HL 94