4.4
CONNECTION OF AUXILIARY CABLES
The UPS systems of the KEOR HP line can be connected to external controls/components
specifically designed to improve the safety and reliability of the device.
External manual bypass;
Diesel generator;
Auxiliary battery contact;
Remote emergency power off button (EPO).
The auxiliary cables are connected using a special terminal board placed aligned with the
power terminal boards.
The section of the terminals used is 6 mm
Picture 16 – Position of auxiliary terminals of KEOR HP
Picture 17 – Auxiliary terminals of KEOR HP
40
OMD39075 REV. F
Installation and start-up of UPS Keor Hp 400-800kVA
Installation et démarrage de l'UPS Keor Hp 400-800 kVA
Installazione e avviamento UPS Keor Hp 400-800kVA
2
.