Invacare Aquatec Ocean E-VIP Mode D'emploi page 15

Operation
Driving position:
CAUTION Risk of accident due to loose footrest

▸ Secure the footrests in the driving position.
1. Turn footrest A inwards.
2. Press down the footrest until the groove engages in the pin of
clip C.
5.4 Control
The product is controlled via the hand control.
The device will stop immediately in its current position as soon as the
relevant buttons are released.
For safety reasons, the drives have certain blocked ranges:
Seat height Seat tilt
500 to 600 mm up to 5° forwards
up to 35° backwards
over 600 mm no forward movement
up to 35° backwards
Shower and Toilet Commode Ocean E-VIP
!
IMPORTANT
If the battery in the battery pack is not sufficiently charged,
yellow indicator lamp D on hand control A lights up and an
acoustic signal is heard while moving. After the indicator lamp
lights up, just five more movement cycles can be carried out.
After this, the lifting function of the device is disabled. You
can, however, still lower the device.
▸ Recharge the battery immediately after lowering the device.
CAUTION Danger of pinching fingers

▸ Do not place your fingers between the seat fame and the
front tubular frame of the chassis when tilting or lowering
the seat.
!
IMPORTANT
If the seat frame is tilted forward, the seat height can be
adjusted to a maximum of 600 mm.
If the seat height is set to more than 600 mm, the seat fame
can no longer be tilted forward.
Tilting the seat frame and backrest
The seat frame can be tilted backwards approx. 35° and forwards
approx. 5°.
1. Press reverse button G or forward button C on the hand control.
The seat frame can be tilted backwards or forwards I.
Lifting
1. Press Up button H on the hand control.
The seat frame moves upwards (J).
Lowering
1. Press Down button B on the hand control.
The seat frame moves downwards (J).
15