Assembling The Shrub Shears; Fitting And Removing The Cutting Blades; Removing And Fitting The Battery; Fitting The Battery - Stihl HSA 25 Notice D'emploi

7 Assembling the Shrub Shears

7 Assembling the Shrub Shears
7.1

Fitting and Removing the Cutting Blades

7.1.1 Fitting the Shrub Shear Blade or Grass Shear Blade
The shrub shear blade and grass shear blade are fitted on
the shrub shears in the same way.
► Switch off the shrub shears and remove the battery.
► Fit the blade scabbard so that it completely covers the
cutting blades.
1
1
2
2
► Engage the lugs (1) of the shrub shear blade (3) or grass
shear blade (3) on the guides (2).
► Swing the shrub shear blade (3) or grass shear blade (3)
down and press it firmly into place.
The shrub shear blade (3) or grass shear blade (3)
engages with a audible click.
► Pull off the blade scabbard (4).
7.1.2 Removing the Shrub Shear Blade or Grass Shear
Blade
The shrub shear blade and grass shear blade are removed
in the same way.
► Switch off the shrub shears and remove the battery.
► Fit the blade scabbard so that it completely covers the
cutting blades.
0458-708-9621-A
3
4
2
1
1
► Press in both locking levers (1).
The shrub shear blade (2) or grass shear blade (2) is
unlocked.
► Remove the shrub shear blade (2) or grass shear blade
(2).
A foam seal (3) protects the gearbox from contamination
during operation. The seal (3) is permanently connected to
the shrub shears and cannot be removed.

8 Removing and Fitting the Battery

8.1

Fitting the Battery

1
2
► Push the battery (2) into the battery compartment (1) as
far as stop.
The battery (2) engages in position with an audible click.
English
3
43