Assembling The Ridger; Attaching And Removing The Ridger; Attaching The Ridger - Stihl AHK 800 Notice D'emploi

English

6 Assembling the Ridger

6.1 Assembling the Ridger
► Unscrew nut (1) and remove bolt (2).
► Insert bracket (3) into the guide of ridger (4) so bores (5)
align.
► Insert bolt (2).
► Screw on nut (1) and tighten firmly.
► Tighten screws (6).
Bracket (3) is secured.
20

7 Attaching and Removing the Ridger

7.1

Attaching the Ridger

WARNING
The tiller may tip over or move when attaching the ridger.
This may result in injury to people and damage to property.
► Always work in pairs when attaching the ridger.
► Stop the engine.
► Place the tiller on a level surface.
► Have a second person lift and hold tiller (1) so blade
spur (2) can be removed.
6 Assembling the Ridger
0478-906-9911-A