Troubleshooting; Remedying Ridger Faults - Stihl AHK 800 Notice D'emploi

14 Troubleshooting

14 Troubleshooting

14.1 Remedying Ridger Faults

Fault
Excessive vibration during
operation.
Ridger not making clean
furrows.
0478-906-9911-A
Cause
Ridger fastening loose.
Swivel range set
incorrectly.
Working angle set
incorrectly.
Working width set
incorrectly.
Working depth is set
incorrectly.
Remedy
► Check the connection elements.
► Adjust the swivel range.
► Adjust the working angle.
► Adjust the working width.
► Adjust the working depth.
English
25