Naming Preset Stations - Sony HT-CT350 Mode D'emploi

Masquer les pouces Voir aussi pour HT-CT350:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2
Press PRESET +/– repeatedly to select
the preset station.
Each time you press the button, the system
tunes in one preset station.
You can select the preset number directly by
pressing the number buttons while pressing
and holding SHIFT.
3
Adjust the volume by pressing
MASTER VOL +/–.
To turn off the radio
Press "/1 to turn off the system, or change to
another function.
To listen to non-preset radio
stations
Use manual or automatic tuning in step 2.
For manual tuning, see "Direct tuning"
(page 33).
For automatic tuning, press and hold TUNING
+/–. The automatic tuning stops when the system
tunes in a station. To stop the automatic tuning
while automatic tuning is in progress, press
TUNING +/–.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1
Press MENU.
2
Press X/x repeatedly until "FM MODE"
appears in the front panel display, then
press
or c.
3
Press X/x to select "MONO."
• STEREO: Stereo reception.
• MONO: Monaural reception.
4
Press
.
The setting is made.
5
Press MENU.
Tip
• To improve reception, reorient the FM wire antenna
(aerial) (supplied).

Naming preset stations

You can enter a name for preset stations. These
names (for example, "XYZ") appear in the front
panel display when a station is selected.
You can enter a name of up to 10 characters.
Note that no more than one name can be entered
for each preset station.
CLEAR
C, X, x, c,
MENU
1
Press TUNER repeatedly until "TUNER
FM" or "TUNER AM" appears in the
front panel display.
The last received station is tuned in.
2
Press PRESET +/– repeatedly to select
the preset station you want to create a
name for.
3
Press MENU.
TUNER
PRESET
+/–
SHIFT
continued
35
US

Publicité

Table des Matières
loading

Table des Matières