Naming Preset Stations; Listening To The Radio - Sony RHT-S10 Mode D'emploi

Naming preset stations

You can enter a name for preset stations. These
names (for example, "XYZ") appear in the front
panel display when a station is selected.
Note that no more than one name can be entered
for each preset station.
Up to 10 characters can be entered.
1
Press AUDIO on the remote.
2
Press FM on the remote.
The last received station is tuned in.
3
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
4
Press MENU.
5
Press X/x repeatedly until "Name In?"
appears in the front panel display.
6
Press .
7
Create a name by using
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you enter a wrong character
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press C/c repeatedly
until the character to be erased flashes, then
press CLEAR.
8
Press .
"Complete!" appears in the front panel
display, and the station name is stored.
9
Press MENU.
Preset radio stations in the unit's memory first
(see "Presetting radio stations" (page 24)).
CLEAR
TUNED ST
C c
/X/x/ .
VOL +/–
1
2
3
TUNED ST

Listening to the radio

Press AUDIO on the remote.
Press FM on the remote.
The last received station is tuned in.
Press PRESET + or – repeatedly to
select the preset station.
Each time you press the button, the unit
tunes in one preset station.
Input
button
(AUDIO)
Input
button
(FM)
MENU
PRESET
–/+
continued
25
US