Bravia" Sync Features; What Is "Bravia" Sync; Preparing For The "Bravia" Sync - Sony RHT-S10 Mode D'emploi

"BRAVIA" Sync Features

What is "BRAVIA" Sync?

By connecting Sony components that are
compatible with the "BRAVIA" Sync with an
HDMI cable (not supplied), operation is
simplified as below:
• One-Touch Play: When you play back a
component such as a Blu-ray Disc/DVD player
(recorder), the unit and the TV are turned on
automatically and switch to the appropriate
HDMI input.
• System Audio Control: While watching TV,
you can select to output the sound from the TV
speaker or the speakers of the unit.
• System Power Off: When you turn off the TV,
the unit and the connected components are also
turned off simultaneously.
"BRAVIA" Sync is compatible with a Sony TV,
Blu-ray Disc/DVD player, AV amplifier, etc.,
with the Control for HDMI function.
CONTROL FOR HDMI is a mutual control
function standard used by CEC (Consumer
Electronics Control) for HDMI (High-Definition
Multimedia Interface).
The Control for HDMI function will
not operate in the following
cases:
• When you connect this unit to a component
which is not correspond with the Control for
HDMI function.
• When you connect the unit and components
using other than HDMI connection.
We recommend that you connect this system to
products featuring "BRAVIA" Sync.
Note
• Depending on the connected component, the Control
for HDMI function may not work. See the operating
instructions of the component.
Preparing for the
"BRAVIA" Sync
To use the "BRAVIA" Sync, set the Control for
HDMI function to on for the unit and the
connected component.
When you connect a Sony TV with the Control
for HDMI function, the Control for HDMI
function for the unit and the connected
component can be set simultaneously by setting
the Control for HDMI function of the TV.
Input
buttons
(TV, BD/
DVD,
SAT)
POWER
C, X,
x, c,
AMP
MENU
continued
27
US