Sony RHT-S10 Mode D'emploi page 50

SAT
Outputs (Analog)
Subwoofer
HDMI section
Connector
Video inputs/outputs
Audio inputs
Tuner section
System
FM tuner section
Tuning range
Antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
Speakers
Front
Speaker units
Center
Speaker unit
50
US
Coaxial
Impedance: 75 ohms
Optical
Pin jack
Voltage: 0.775 V RMS
Impedance: 1 kohm
HDMI 19pin-standard
connector
SAT, BD/DVD:
640 × 480p@60 Hz
720 × 480p@59.94/60 Hz
1440 × 480p@59.94/60 Hz
(pixel sent 2 times)
1280 × 720p@59.94/60 Hz
1920 × 1080i@59.94/
60 Hz
1920 × 1080p@59.94/
60 Hz
720 × 576p@50 Hz
1440 × 576p@50 Hz
(pixel sent 2 times)
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
SAT, BD/DVD INPUT:
Linear PCM 7.1ch/
Dolby Digital/ DTS
PLL quartz-locked digital
synthesizer
87.5 – 108.0 MHz
(100 kHz step)
FM wire antenna (aerial)
10.7 MHz
50 mm (2 inches) cone type
× 2
50 mm (2 inches) cone type
Surround
Speaker unit
Subwoofer
Speaker unit
General
Power requirements
Power consumption
Power output
(DIGITAL MEDIA PORT)DC OUT: 5 V, 700 mA
Dimensions (approx.)
Mass (approx.)
Supplied accessories
Design and specifications are subject to change without
notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not
used in the printed wiring boards.
• Over 85 % power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
• Halogenated flame retardants are not used in cabinets.
50 mm (2 inches) cone type
× 2
100 mm (4 inches) cone
type × 2
AC 120 V/60 Hz
On: 85 Watts
Control for HDMI is on:
1.5 Watts or more
Standby (Control for
HDMI is off):
0.3 Watts
1,134 × 138.5 × 172 mm
3
(44 / × 5 1 / × 6 7 /
4 2 8
inches)
(w/h/d) incl. projecting
parts
12.4 kg (27 lb 6 oz)
Optical cable (1 m)
(39 3 / inches) (1)
8
Remote commander (RM-
ANP009) (1)
Size AA (R6) batteries (2)
FM wire antenna (aerial)
(1)
Operating Instructions (1)