Connecting The Antenna (Aerial) - Sony HT-CT350 Mode D'emploi

Connecting the antenna (aerial)

Connecting the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
Remove only the loop part from the plastic stand.
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
While pushing down the terminal clamp, insert the (*) part of the cords.
The cords can be connected to either terminal.
Rear of the
subwoofer
BD IN
Note
• Do not place the AM loop antenna (aerial) near the system or other AV component, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly on the cord.
26
US
L
ANTENNA
R
FM
AUDIO IN AUDIO IN
75 COAXIAL
SA-CD/CD TV
HDMI
ARC
SAT/CATV IN TV OUT
DIGITAL
OPT IN COAX IN
ONLY FOR
SS-CT350
SAT/CATV TV
AM
VIDEO
*