Sony HT-CT350 Mode D'emploi page 9

Connecting the speaker cord to the speaker
The connectors of the speaker cord are color-coded depending on the type of speaker. Connect the
connectors of the speaker cord to match the color of the speaker jacks.
1
Remove the screw of the cover at the rear of the speaker, and then remove the cover.
2
Connect the speaker cord.
3
Guide the speaker cord through the square notch at the bottom of the cover, and then
reattach the cover to the speaker and secure it with the screw removed in step 1.
If you install the speaker to the TV, do not reattach the cover. Perform the steps in "Installing the
speaker on the TV stand" (page 13), or "Hanging the speaker and TV on a wall" (page 17).
Notes
• When you install the speaker or a TV on a wall, be careful not to stumble over the cord connected to the speaker.
• Be careful not to pinch the speaker cord when you reattach the cover.
Rear of the speaker
Green
White
A
Red
A Speaker cord
(supplied)
9
US